HIKVISION DS-PD2-D10P-W1 User Manual Download Page 1

1.Log in to the APP Store and input” Hik-Connect” to search the mobile client. 

   Download and install Hik-Connect to your phone. 

2.After installing, tap      to run  the client.

3.Power on the security control panel.

4.Log in the Hik-Connect and tap the icon“+” at the upper-right coner of the 

   Hik-Connect page to add the security control panel. You can scan the QR code 

   on the device rear panel or on the package box,  or input the device serial No. 

   manually to add the device when the device is in the registration mode.

5.After adding the security control panel, tap the alarming status icon on the 

   right of the security control panel's name to enter the Partition page.

6.Tap the”+” icon on the Partition page to add the peripherals.

DS-PD2-D10P-W/W1

Wireless 10m Pet Immune Dual 

Technology Detector

LEDs

HIGH

LOW

LEDs

0.3 - 3m/s

0.3 -3m/s

10m

10m

10m

0m

2.4m

Battery Information

References

E N G L I S H

WIRELESS DEVICE CONTROL 

REGISTER LOCALLY/ VIA APP

DIAGNOSTICS

Initialize the Detector

E O

L

EO

L

E

O

L

Specification

Register Locally 

Hangzhou Hikvision Digital Technology CO.

,

Lt

d.          No.

555 Qianmo Road

,

 Binjiang District

, Han

gzhou 310052

, Chin

a

Register Via APP

1

2

3

Please note: Once registered, the detector will begin a 10 minute timer allowing 

walk test of the PIR and microwave. During this time, the detector will not 

transmit to the panel and is used to adjust the PIR and microwave settings. 

1.Make the security control panel enter the registration mode.

2.Register the detector: Hold the registration key until the three LEDs flash 

alternately. The green LED will flash 8 times if the registration is finished.

3.Communication Test: Release the TAMPER spring to trigger the alarm.

Note: 

The distance between the security control panel and the detector should 

be less than 50 cm.

Please register the detector within 90 seconds after it being powered on.

1.Remove the battery to power the detector off.

2.5s later, hold the registration key and reinstall the battery to power the 

detector on at the same time to make the three LEDs start flashing alternately. 

Release the registration key while the three LEDs flash once together.

Lens Characteristics

Key Features

Electrical & Battery

Environment Features

Accessories

1

The batteries supplied have been chosen to provide long service life whilst, for safety 

reasons, having limited output current.

The battery is protected on purchase by a piece of plastic that must be removed for 

operation. When disposing of the product, the battery must be removed and disposed 

of separately in accordance with the local regulations.

This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under

the RE Directive 2014/53/EU, the RoHS Directive

2011/65/EU. 

For electrical products sold within the European

Community. At the end of the electrical products life, it

should not be disposed of with household waste. Please

recycle where facilities exist. Check with your local

Authority or retailer for recycling advice in your country.    

This product operates in a European 

non-harmonised frequency band

Detec

ti

on Rang e

Detection Angle
Detection Zones
Detection Speed
Mounting Height

Animal Immune

Blue Wave Technology
Automatic Sensitivity
Digital Temperature Compensation
Separate Indication: Microwave, PIR and Alarm

3 Microwave Frequencies to Avoid Interference

Tamper Protection

Signal Strength Indicators (SSI)

Microwave Frequency

Transmission Frequency
Range in Open Space

3V Lithium Battery Included
Minimum Battery Life (years)

Operating Temperature
Weight
Dimensions(H x W x D)
Optics
Geometric Lens Configuration

Ceiling mounted bracket included

Wall mounted bracket included

10m

85°

56 zones

 6 planes

0.3 - 3m/s
1.8-2.4m

Up to 24kg

Yes
Yes
Yes

Orange (Microwave), Blue (Alarm), Green (PIR)

 

Front, rear, and bracket tamper signal input

Yes

Yes

10.515, 10.525, 10.535 GHz

9.89, 9.90, 9.91 GHz

433MHz, FM transceiver
800m

2x CR123A
2       

-10°C to +40°C(Certfied)

135g
117 x 69 x 62mm
Sealed
3D

Yes
Yes

5s

RE

GISTRA

TION

>5s

300s

2

3

Reviews: