Mobile Network Video Recorder User Manual
60
Figure 12-2
Alarm Input Settings
Step 2
Select
Alarm Input No.
Step 3
Enter
Alarm Name
.
Step 4
Select
Trigger Level
.
High level
: 6 to 36 VDC.
Low level
: 0 to 5 VDC.
In order to avoid error caused by voltage fluctuation, no alarm will be triggered by voltage
ranging from 5 VDC to 6 VDC.
Step 5
Click
Set
of
Schedule
to set arming schedule. For detailed steps, refer to
Configure Arming Schedule and Linkage Actions
Step 6
Check
Linkage Action
and click
Set
of Linkage Action to set the linkage actions. For
12.10 Configure Arming Schedule and Linkage Actions
Step 7
Click
OK
.
12.3 Configure Alarm Output
Purpose:
Configure the arming schedule, alarm duration time and alarm name for alarm output.
Step 1
Go to
Menu > Other Settings > Alarm Out
.
Summary of Contents for DS-MP7608HN Series
Page 1: ...Mobile NVR User Manual...
Page 79: ...Mobile Network Video Recorder User Manual 78 Step 3 Click OK...
Page 89: ......