Mobile Network Video Recorder User Manual
49
Step 1
Go to
Menu > Other Settings > Alarm In
.
Figure 8-8
Alarm Input Settings
Step 2
Click
Set
of
Triggered Camera
to select the alarm triggered recording channel.
Step 3
Click
OK
.
Step 4
Enter the record settings interface to set alarm triggered recording schedule. Refer to
for record settings. Recording type must be alarm, motion |
alarm, or motion & alarm.
8.2.4 Configure Alarm Terminal
Before you start:
Install an alarm terminal. For details, refer to alarm terminal user manual.
The RS-232 serial port should be used in the way of transparent channel and the baud
rate should be set as 9600.
Step 1
Go to
Menu > Other Settings > Alarm Terminal
.
Figure 8-9
Alarm Terminal
Step 2
Check
Enable Alarm Terminal
.
Step 3
Edit
Terminal Name
.
Summary of Contents for DS-MP7608HN Series
Page 1: ...Mobile NVR User Manual...
Page 79: ...Mobile Network Video Recorder User Manual 78 Step 3 Click OK...
Page 89: ......