Mobile Network Video Recorder User Manual
48
Post-Record:
After the event finished, the video can also be recorded for a certain time.
For example, when an alarm ends at 11:00, if the post-record time is set as 5 seconds,
the camera records till 11:00:05.
Step 6
Click
OK
.
8.2.2 Configure Motion Detection Recording
Purpose:
In the motion detection recording, once a motion event occurs, the device starts to record.
Step 1
Go to
Menu > Other Settings > Camera
.
Step 2
Click
Set
of
More Setting
.
Figure 8-7
Motion Detection Settings
Step 3
Check
Motion Detection
.
Step 4
Click
Area Settings of Motion Detection
.
Step 5
Edit area settings. For details, refer to
12.11 Configure Detection Area
Step 6
Set the camera to trigger motion detection recording.
1)
Click
Handle
of
Motion Detection
.
2)
Click
Set
of
Triggered Alarm
.
3)
Check cameras to trigger recording and click
OK
.
4)
Click
OK
.
Step 7
Click
OK
.
Step 8
Set motion detection recording schedule. For details, refer to
Recording type
must be alarm, motion|alarm, or motion&alarm.
8.2.3 Configure Alarm Triggered Recording
Purpose:
Follow the procedure to configure alarm triggered recording.
Summary of Contents for DS-MP7608HN Series
Page 1: ...Mobile NVR User Manual...
Page 79: ...Mobile Network Video Recorder User Manual 78 Step 3 Click OK...
Page 89: ......