Network Video Recorder Quick Start Guide
84
Step 2
Press Enter to pop up dropdown list.
Step 3
Press Up/Down to select an item.
Step 4
Press Enter to select it.
17.3 Troubleshooting
Purpose:
If there is no response after you press any button on the remote, follow the procedure below to
troubleshoot.
Step 1
Go to
Menu > Other Settings > Display
Step 2
Click
Set
of
Advanced Settings
.
Step 3
Edit device number. The default number is 255.
Step 4
Press
DEV
on the remote control.
Step 5
Enter the device number.
Step 6
Press
ENTER
on the remote control.
17.4 Set Areas with Remote Control
Step 1
Click the
Area Settings
button.
Step 2
Press the
Edit
key on the remote control and a red block appears on the screen.
Step 3
Press the
Direction
keys on the remote control to adjust the position of the red block.
Step 4
Press the
Enter
key on the remote control to save the position of the red block.
Step 5
Press the
Direction
keys on the remote control to adjust the size of the block.
Step 6
Press the
Enter
key on the remote control to save the size of the block.
Step 7
Press the
Menu
key on the remote control to set the detection sensitivity. You can set the
level as 1~6 or off. Click
OK
to save the settings.
Step 8
You can press the
A
key on the remote control to clear all the mask areas.
Press the
Enter
key on the remote control to save the settings and then press
Esc
key to exit.
Summary of Contents for DS-MP7608HN Series
Page 1: ...Mobile NVR User Manual...
Page 79: ...Mobile Network Video Recorder User Manual 78 Step 3 Click OK...
Page 89: ......