HIKVISION DS-MP7608HN Series, User Manual, Page: 72 / 89

Mobile Network Video Recorder User Manual
71
Step 8 Click OK in network settings interface.
14.4 Configure Advanced Display Settings
Purpose:
Set the system time, select the CVBS output standard, enable the password, configure the
DST settings, etc.
Step 1 Go to Menu > Other Settings > Display .
Step 2 Click Set of Advanced Settings .
Figure 14-4 Advanced Settings
Step 3 Edit parameters as required.

Device Name : Enter the system name as desired.

Device No. : Edit the device No. for remote control. The device No. ranges from 1 to 255.
The default device No. is 255. It is not recommended to modify Device No. Otherwise,
you need to enter the Device No. on the remote control every time you use it.

CVBS Brightness : Adjust video output brightness.

Menu Transparency : The transparency proportion of the menu displayed on the live
view interface. You can set it as 1:3, 1:1, 3:1 , or Non-transparent . The smaller the
proportion value is, the more transparent the menu is. When Non-transparent is
selected, only the menu is displayed on the page.

Operation Timeout : If no operation is performed after a specified period of time, live
view will be displayed automatically.

Enable Touchscreen : Enable/disable touchscreen. If the function is on, PTZ function is
unavailable.
Step 4 Click OK .