User Manual of Mobile Digital Video Recorder
38
5.
Click to select a video and click
Play
to start playback the video.
4.2
Playing Back Event Video
Purpose:
Five event types are provided, including alarm input, manual alarm, speeding alarm, G-sensor event, and sensor-in event.
For the five events, when an event happens, all the cameras whose normal recording enabled will be triggered to record the
event video.
Alarm input video is triggered by alarm input. Manual alarm is triggered by alarm terminal.
Steps:
1.
Enter Video Search interface.
Menu > Video Search
Figure 4. 5
Video Search
2.
Select
Search Mode
as
Event
.
3.
Specify
Event Type
and other search conditions.
4.
Click
Search
and then search results will be listed.
5.
Select the
Pre-Play
and
Post-Play
time.
●
Pre-play
: the time you set to play back before the video. For example, if the recorded video starts at 10:00:00
and the pre-play time is 30 seconds, the video starts at 9:59:30 during playback.
●
Post-play
: the time you set to play back after the video. For example, if the recorded video starts at 10:00:00 and
the post-play time is 30 seconds, the video ends at 10:00:30 during playback.
6.
Click to select an event, click
Play
to select camera to play back. After cameras are selected, click
OK
to start
playback.
