HIKVISION DS-M5504HNI Series, User Manual

Page: 56 / 78

Mobile Network Video Recorder User Manual
55
settings, see Chapter 7.2.2.
6. Click the Set button of Display Channel, and select the connected IP cameras. Then the device positioning information
will be displayed on the selected channels.
7. Click OK to save the new settings and exit.
You can view the device positioning status on the Positioning Status interface (Menu>Status>Position).
7.3 Configuring G-Sensor Alarm
Purpose:
G-Sensor detects and records the acceleration speed information in 3-axial (X, Y, Z) directions.
Before you start:
Connect an external sensor to the device for obtaining and providing the acceleration speed in 3-axial directions.
Steps:
1. Enter the G-Sensor Settings interface.
Menu>Basic Settings>G-Sensor
Figure 7. 4 G-Sensor Settings
2. Select the mode of G-sensor Module. 2 modes of G-sensor module are selectable.

RS232 : The G-sensor is connected to the mobile NVR through RS232 interface.

Built-in: The G-sensor is built in the mobile NVR
3. Set the limit value for acceleration alarm in X, Y and Z directions.
X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8 m/s
2
).
4. Set the linkage actions for acceleration alarm, including audible warning and alarm output. For details of alarm output
settings, see Chapter 7.2.2.
5. Click OK to save the new settings and exit.
You can view the G-sensor status on the G-sensor Status interface (Menu>Status>G-sensor).
7.4 Configuring Sensor-In
Purpose:
Sensor-In detects and records the driving information of the vehicle, including pedal braking, turning left/right, reversing,