HIKVISION DS-KH6320-TE1, Operation Manual, Page: 19 / 33

Figure 2-6 Disarm Room
2. Enter the arm/disarm password.
Note
You can set the arm/disarm password in the general settings. For details, see the
configuration guide.
3. Tap OK.
2.5 Arming Mode Settings
4 arming modes can be configured: stay mode, away mode, sleeping mode and
custom mode.
Before You Start
Tap Settings → → Shortcut Settings to enable Alarm.
Steps
Note
On the home page, the arming status function and zone settings function are hidden
by default. You should enable the alarm function first.
1. Back to the home page, tap Settings → → Scene Settings to enter the arming
mode settings page.
2. Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Network Indoor Station Operation Guide
8