2. Enable Enable Motion Detection.
3. Configure the parameters.
4. Click Save.
Note
The arming schedule is defaulted as all-day.
1.6.9 Intercom Protocol
Steps
1. Click Intercom Protocol to enter the intercom protocol page.
2. Select the protocol according to needs.
3. Click Save.
1.6.10 Sub Module
Steps
1. Click Sub Module to enter the sub module configuration page.
Figure 1-22 Sub Module
2. Optional: Enter the Room No. for each call button of the nametag module.
Module Door Station Configuration Guide
16
Summary of Contents for DS-KD8003-IME2
Page 1: ...Module Door Station Configuration Guide ...
Page 51: ...UD14533B ...