HIKVISION DS-KD8003-IME2, Configuration Manual, Page: 23 / 51

Figure 1-20 Dial (Standard SIP)
2. Enter the room No. of the indoor station that the door station connected to.
3. Click Save to enable the settings.
Note
By default, quick press the call button, the door station calls resident. If you
check Quick Press for Calling Center, the door station calls the management
center when quick press the call button of the main unit.
1.6.8 Motion Detection
Steps
1. Click Motion Detection to enter the motion detection page.
Figure 1-21 Motion Detection
Module Door Station Configuration Guide
15