Figure 1-4 Modify Parameters
Note
•
The default port No. is 8000.
•
The default IP address of the door station is 192.0.0.65.
•
After editing the network parameters of device, you should add the devices
to the device list again.
1.3 Add Device
To configure the device remotely, you need to add the device to iVMS-4200 client
software.
Steps
1. Select the activated device and click Add to Client.
Figure 1-5 Add Device
2. Enter corresponding information, and click Add.
Module Door Station Configuration Guide
3
Summary of Contents for DS-KD8003-IME2
Page 1: ...Module Door Station Configuration Guide ...
Page 51: ...UD14533B ...