HIKVISION DS-K5671-3XF Series, User Manual

Page: 61 / 154

7.6 Identity Authentication
After network configuration, system parameters configuration and user configuration, you can go
back to the initial page for identity authentication. The system will authenticate person according
to the configured authentication mode.
You can authenticate identity via 1:1 matching or 1:N matching.
1:N Matching
Compare the captured face picture with all face pictures stored in the device.
1: 1 Matching
Compare the captured face picture with all face pictures stored in the device.
7.6.1 Authenticate via Single Credential
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Authenticate face, card or QR code.
Face
Face forward at the camera and start authentication via face.
Card
Present the card on the card presenting area and start authentication via card.
Note
The card can be normal IC card, or encrypted card.
QR Code
Put the QR code in front of the device camera to authenticate via QR code.
Note
●
Authentication via QR code should be supported by the device.
●
The dimension of the recognized QR code picture should be larger than 6 cm × 6 cm.
If authentication completed, a prompt "Authenticated" will pop up.
7.6.2 Authenticate via Multiple Credential
Before You Start
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Steps
1. If the authentication mode is Card and Face, Password and Face, Card and Password,
authenticate any credential according to the instructions on the live view page.
DS-K5671-3XF Series Face Recognition Terminal User Manual
47