HIKVISION DS-K5671-3XF Series, User Manual

Page: 49 / 154

-
If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.
6. Tap OK to save the settings and go back to the Wi-Fi tab.
7. Tap to save the network parameters.
7.2.3 Set RS-485 Parameters
The face recognition terminal can connect external access controller, secure door control unit or
card reader via the RS-485 terminal.
Steps
1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
2. On the Communication Settings page, tap RS-485 to enter the RS-485 tab.
Figure 7-6 Set RS-485 Parameters
3. Select an peripheral type according to your actual needs.
DS-K5671-3XF Series Face Recognition Terminal User Manual
35