HIKVISION DS-K5671-3XF Series, User Manual

Page: 46 / 154

7.2.1 Set Wired Network Parameters
You can set the device wired network parameters, including the IP address, the subnet mask, the
gateway, and DNS parameters.
Steps
1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
2. On the Communication Settings page, tap Wired Network.
Figure 7-4 Wired Network Settings
3. Set IP Address, Subnet Mask, and Gateway.
-
Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically.
DS-K5671-3XF Series Face Recognition Terminal User Manual
32