HIKVISION DS-K5671-3XF Series, User Manual, Page: 29 / 154

Chapter 5 Activation
You should activate the device before the first login. After powering on the device, the system will
switch to Device Activation page.
Activation via the device, SADP tool and the client software are supported.
The default values of the device are as follows:
●
The default IP address: 192.0.0.64
●
The default port No.: 8000
●
The default user name: admin
5.1 Activate via Device
If the device is not activated, you can activate the device after it is powered on.
On the Activate Device page, create a password and confirm the password. Tap Activate and the
device will activated.
DS-K5671-3XF Series Face Recognition Terminal User Manual
15