5.1 Configuration via Button
Button Description
The buttons are on the lane control board.
Figure 5-1 Button
Exit Button
●
Single press to open the gate from the entrance position.
●
Double press to open the gate from the exit position.
Parameter Configuration Button
●
LEFT: Press to add ten to configuration data
●
RIGHT: Press to add one configuration data
●
CANCEL: Return to the level-1 menu, or exit the configuration from the level-1 menu
●
OK: Confirm the data, or enter configuration mode, or enter the submenu
Note
●
Configuration data is displayed by two digital tubes.
●
Level-1 Menu: If the decimal point on the right is on, it indicates the level-1 menu. The
number represents the configuration item number.
●
Level-2 Menu: if the decimal point in the middle is on, it indicates the level -2 menu. The
number represents the parameters of a configuration item.
DS-K3G411LX Series Tripod Turnstile User Manual
13
Summary of Contents for DS-K3G411LX Series
Page 1: ...DS K3G411LX Series Tripod Turnstile User Manual...
Page 32: ...UD30763B...
