HIKVISION DS-K3B961TX Series User Manual Download

Page: 105 / 126

3) Click Apply All to Devices or Apply Changes to Devices.

Apply All to Devices

This operation will clear all the existed access groups of the selected devices and then

apply the new access group to the device.

Apply Changes to Devices

This operation will not clear the existed access groups of the selected devices and only

apply the changed part of the selected access group(s) to the device(s).

4) View the applying status in the Status column or click Applying Status to view all the applied

access group(s).

Note

You can check Display Failure Only to filter the applying results.

The selected persons in the applied access groups will have the authorization to enter/exit the

selected doors/door stations with their linked card(s) or fingerprints.

9. Optional: Click to edit the access group if necessary.

Note

If you change the persons' access information or other related information, you will view the

promptAccess Group to Be Applied on the right corner of the client.

You can click the prompt to apply the changed data to the device. You can select either Apply

Now or Apply Later.

Figure 8-3 Data Synchronization

8.7 Configure Advanced Functions

You can configure the advanced functions of access control to meet some special requirements in

different scene, such as multi-factor authentication, anti-passback, etc.

DS-K3B961TX Series Swing Barrier User Manual

Summary of Contents for DS-K3B961TX Series































































































































Search results

Summary of Contents for DS-K3B961TX Series

Reviews:

Related manuals for DS-K3B961TX Series

Brands by name

Popular brands

HIKVISION DS-K3B961TX Series, User Manual

Search results

Summary of Contents for DS-K3B961TX Series

Reviews:

Related manuals for DS-K3B961TX Series

Brands by name

Popular brands