Enable CPU Card
Enable CPU card and authenticating by presenting CPU card is available.
CPU Card Read Content
After enable the CPU card content reading function, the device can read the CPU card content.
Enable ID Card
Enable ID card and authenticating by presenting ID card is available.
Enable FeliCa Card
The device can read the data from FeliCa card when enabling the FeliCa card function.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Go to Configuration → General → Card Authentication Settings .
Select a card authentication mode and enable reversed card No. at your actual needs. Click Save.
9.6.14 Set Privacy Parameters
Set the event storage type, picture upload and storage parameters, and the picture clearing
parameters.
Go to Configuration → General → Privacy
Event Storage Settings
The event storage type is overwriting by default. The earliest 5% events will be deleted when the
system detects the stored events has been over 95% of the full space.
Authentication Settings
Display Authentication Result
You can check Face Picture, Name, and Employee ID, to display the authentication result.
Name De-identification
You can check Name De-identification, and the whole name will not be displayed.
ID De-identification
You can check ID De-identification, and the ID will not be displayed.
Picture Uploading and Storage
Upload Picture After Linked Capture
Upload the pictures captured by linked camera to the platform automatically.
Save Pictures After Linked Capture
DS-K3B631TX Series Swing Barrier User Manual
82
Summary of Contents for DS-K3B631TX Series
