HIKVISION DS-K3B631TX Series User Manual Download

Page: 81 / 174

Set Audio Parameters

Click Configuration → Video/Audio → Audio .

Select the audio channel.

You can also drag the block to adjust the device output volume.

Click to enable Voice Prompt.

Click Save to save the settings after the configuration.

Note

The functions vary according to different models. Refers to the actual device for details.

9.6.9 Set Image Parameters

You can adjust the image parameters, video parameters, supplement light parameters, beauty

parameters, and capture interval.
Steps
1. Click Configuration → Image .
2. Configure the parameters to adjust the image.

Image Adjustment

Drag the block or enter the value to adjust the live video's brightness, contrast, saturation,

and sharpness.

Video Adjustment (Video Standard)

Set the video frame rate when performing live view remotely. After changing the standard,

you should reboot the device to take effect.
PAL

25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East

countries, Europe countries, etc.

NTSC

30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the

Philippines, etc.

Supplement Light

Set the supplement light type, mode, and brightness.

Backlight

Enable or disable WDR.
When there are both very bright and very dark areas simultaneously in the view, WDR

balances the brightness level of the whole image and provide clear images with details.

Beauty

Set whiten and smooth value for the face appeared on the device live view page.

DS-K3B631TX Series Swing Barrier User Manual

Summary of Contents for DS-K3B631TX Series















































































































































































Search results

Summary of Contents for DS-K3B631TX Series

Reviews:

Related manuals for DS-K3B631TX Series

Brands by name

Popular brands

HIKVISION DS-K3B631TX Series, User Manual

Search results

Summary of Contents for DS-K3B631TX Series

Reviews:

Related manuals for DS-K3B631TX Series

Brands by name

Popular brands