manualshive.com logo in svg

HIKVISION DS-K3B631TX Series, User Manual

The HIKVISION DS-K3B631TX Series is an exceptional security product that ensures reliable access control. For convenient usage and setup, we provide a comprehensive User Manual that can be easily downloaded for free from our website. Take advantage of the manual's detailed instructions and step-by-step guidance for optimal performance of your HIKVISION device.

Share
Download
background image

Steps
1. Enter Person module.
2. Select the person you want to report card loss for and click Edit to open the Edit Person window.
3. In the Credential → Card panel, click   on the added card to set this card as lost card.

After reporting card loss, the access authorization of this card will be invalid and inactive. Other

person who gets this card cannot access the doors by swiping this lost card.

4. Optional: If the lost card is found, you can click   to cancel the loss.

After cancelling card loss, the access authorization of the person will be valid and active.

5. If the lost card is added in one access group and the access group is applied to the device

already, after reporting card loss or cancelling card loss, a window will pop up to notify you to

apply the changes to the device. After applying to device, these changes can take effect on the

device.

11.4.6 Set Card Issuing Parameters

The client provides two modes for reading a card's number: via card enrollment station or via the

card reader of the access control device. If a card enrollment station is available, connect it to the

PC running the client by USB interface or COM, and place the card on the card enrollment to read

the card number. If not, you can also swipe the card on the card reader of the added access control

device to get the card number. As a result, before issuing a card to one person, you need to set the

card issuing parameters including the issuing mode and related parameters.
When adding a card to one person, click Settings to open the Card Issuing Settings window.

Local Mode: Issue Card by Card Enrollment Station

Connect a card enrollment station to the PC running the client. You can place the card on the card

enrollment station to get the card number.
Card Enrollment Station

Select the model of the connected card enrollment station

Note

Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M,

DS-K1F100-D8E, and DS-K1F180-D8E.

Card Type

This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E.
Select the card type as EM card or IC card according to the actual card type.

Serial Port

It is only available when the model is DS-K1F100-M.
Select the COM the card enrollment station connects to.

Buzzing

DS-K3B631TX Series Swing Barrier User Manual

134

Summary of Contents for DS-K3B631TX Series















































































































































































Reviews:

No comments

Related manuals for DS-K3B631TX Series

Magnetic Autocontrol MPP-112 Operating Instructions Manual preview
MPP-112
Brand: Magnetic Autocontrol Pages: 88
CAB RB.400 Manual preview
RB.400
Brand: CAB Pages: 40

Brands by name

Popular brands

Load more brands