manualshive.com logo in svg

HIKVISION DS-K3B501SX Series, Quick Start Manual

The HIKVISION DS-K3B501SX Series offers cutting-edge security features. Get started quickly with the included Quick Start Manual. Easily download the complete user manual for free from manualshive.com, providing comprehensive instructions and insights to maximize the potential of this exceptional product.

Share
Download
background image

4.5.2 Sub Control Board Terminal Description

The sub lane control board contains interconnecting interfaces, BUS, motor encoder interface,

debugging port, door closed position interface, seven-segment display, strip light interface

(reserved), supercapacitor, power interface, and motor drive interface.
The picture displayed below is the sub control board diagram.

DS-K3B501SX Series Swing Barrier Quick Start Guide

16

Summary of Contents for DS-K3B501SX Series
























































Reviews:

No comments

Related manuals for DS-K3B501SX Series

BFT MOOVI 130/KIT BARR 130 Installation And User Manual preview
MOOVI 130/KIT BARR 130
Brand: BFT Pages: 4
CAME GARD series Manual preview
GARD series
Brand: CAME Pages: 24
Motorline professional MBM11 Installer And User Manual preview
MBM11
Brand: Motorline professional Pages: 9

Brands by name

Popular brands

Load more brands