HIKVISION DS-K3B501S Series Page 58 User Manual Download

Page: 58 / 116

3) Click OK to save the captured photo.

7. Confirm to add the person.

Click Add to add the person and close the Add Person window.

Click Add and New to add the person and continue to add other persons .

6.4.7 Collect Fingerprint via Client

Collecting fingerprints locally means you can collect the fingerprint via the fingerprint recorder

connected directly to the PC running the client. The fingerprints recorded can be used as

credentials of the persons to access the authorized doors.
Before You Start

Connect the fingerprint recorder to the PC running the client.
Steps

1. Enter Person module.

2. Select an organization in the organization list to add the person and click Add.

Note

Enter the person's basic information first. For details about configuring person's basic

information, refer to Configure Basic Information .

3. In the Credential → Fingerprint panel, click +.

4. In the pop-up window, select the collection mode as Local.

5. Select the model of the connected fingerprint recorder.

Note

If the fingerprint recorder is DS-K1F800-F, you can click Settings to select the COM the

fingerprint recorder connects to.

6. Collect the fingerprint.

1) Click Start.

2) Place and lift your fingerprint on the fingerprint recorder to collect the fingerprint.

3) Click Add to save the recorded fingerprint.

7. Confirm to add the person.

Click Add to add the person and close the Add Person window.

Click Add and New to add the person and continue to add other persons.

Note

Once the fingerprint is added, the fingerprint type cannot be changed.

DS-K3B501S Series Swing Barrier User Manual

Summary of Contents for DS-K3B501S Series





















































































































Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands

HIKVISION DS-K3B501S Series, User Manual

Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands