Access Controller
·
User Manual
80
7.7.1
Adding Permission
Purpose:
You can assign permission for persons to enter/exist the access control points (doors) in this
section.
Steps:
1.
Click
Add
icon to enter following interface.
2.
In the Permission Name field, input the name for the permission as desired.
3.
Click on the dropdown menu to select a template for the permission.
Note:
You should configure the template before permission settings. You can click
Add
Template
button to add the template. Refer to
Chapter 7.6 Schedule and Template
4.
In the Person list, all the added persons display.
Check the checkbox(es) to select person(s) and click
>
to add to the Selected Person list.
(Optional) You can select the person in Selected Person list and click
<
to cancel the selection.
5.
In the Access Control Point/Device list, all the added access control points (doors) and door
stations will display.
Check the checkbox(es) to select door(s) or door station(s) and click
>
to add to the selected
list.
(Optional) You can select the door or door station in the selected list and click
<
to cancel the
selection.
6.
Click
OK
button
to complete the permission adding. The selected person will have the
