Access Controller
·
User Manual
50
Note:
The interface may different from the picture displayed above. Refer to the actual interface
when adopting this function.
Door Status
: The status of the connected door.
Host Status
: The status of the host, including Storage Battery Power Voltage, Device Power Supply
Status, Multi-door Interlocking Status, Anti-passing Back Status, and Host Anti-Tamper Status.
Card Reader Status
: The status of card reader.
Note:
If you use the card reader with RS-485 connection, you can view the status of online or
offline. If you use the card reader with Wiegand connection, you can view the status of offline.
Alarm Input Status
: The alarm input status of each port.
Alarm Output Status
: The alarm output status of each port.
Event Sensor Status
: The event sensor status of each port.
Secure Door Control Unit Status:
The online status and tamper status of the Secure Door Control
Unit.
Arming Status:
The status of the device.
7.4.3
Editing Basic Information
Purpose:
After adding the access control device, you can edit the device basic information.
Steps:
1.
Select the device in the device list.
2.
Click
Modify
to pop up the modifying device information window.
3.
Click
Basic Information
tab to enter the Basic Information interface.
