Access Controller
·
User Manual
95
1.
Click
Multi-door Interlocking
tab to enter the multi-door interlock settings page.
2.
Select an access controller from the Controller List.
3.
Click
Add
to pop up the Add Access Control Point to Interlock interface.
4.
Select the access control point (door) from the list.
Note:
Up to four doors can be added in one multi-door interlocking combination.
5.
Click
OK
to save the adding.
6.
(Optional) After adding the multi-door interlocking combination, you can select it from the list
and click
Delete
to delete the combination.
7.
Click
Save
button to save and take effect.
7.8.8
Authentication Password
Purpose:
You can open the door by inputting the authentication password on the card reader keypad after
finishing the operation of setting authentication password.
Notes:
This authentication password function is only valid during the schedules when the card reader
authentication mode for the access control device is set as
Card or Authentication Password
.
For details, please refer to
Chapter 7.8.2 Card Reader Authentication.
This function should be supported by the access control device.
Steps:
1.
Click
Authentication
Password
tab and select an access control device from the list.
