Access Controller
·
User Manual
91
Steps:
1.
Click
Anti-passing Back
tab to enter the following interface.
2.
Select an access control device from the device list on the left.
3.
In the First Card Reader field, select the card reader as the beginning of the path.
4.
In the list, click the text filed of
Card Reader Afterward
and select the linked card readers.
Example:
If you select Reader In_01 as the beginning, and select Reader In_02, Reader Out_04
as the linked card readers. Then you can only get through the access control point by swiping
the card in the order as Reader In_01, Reader In_02 and Reader Out_04.
Note:
Up to four afterward card readers can be added for one card reader.
5.
(Optional) You can enter the Select Card Reader dialog box again to edit its afterward card
readers.
6.
Click
Save
to save and take effect of the new settings.
7.8.6
Cross-Controller Anti-passing Back
Purpose:
You can set anti-passing back for card readers in multiple access controllers. You should swipe the
