Main Elevator Controller
User Manual
94
The elevator cannot be controlled by other client software if the elevator status changes.
Only one client software can control elevator each time.
The client software which has controlled the elevator can receive the alarm information and
the elevator status. Other clients cannot.
7.11.3
Status Duration Configuration
Purpose:
You can schedule weekly time periods for an access control point (floor) to be free or disabled.
In the Door Status module, click
Status Duration
button to enter the Status Duration interface.
Steps:
1.
Click to select a floor from the access control device list on the left.
2.
On the Door Status Configuration panel on the right, draw a schedule for the selected door.
1)
Select a status brush as Free or Disabled.
Free: The floor button will be free during the configured time period. The brush is
marked as
.
Disabled: You cannot press the floor button during the configured duration. The brush
is marked as
.
2)
Click and drag on the timeline to draw a color bar on the schedule to set the duration.