Main Elevator Controller
User Manual
50
2.
Select the serial No. of the port from the dropdown list to set the RS-485 parameters.
3.
Set the baud rate, data bit, the stop bit, parity, flow control, communication mode, and
working mode in the dropdown list.
4.
Click Save to save the settings and the configured parameters will be applied to the device
automatically.
Note:
After changing the working mode, the device will be rebooted. A prompt will be popped up
after changing the working mode.
7.3.6
Remote Configuration
Purpose:
In the device list, select the device and click Remote Configuration button to enter the remote
configuration interface. You can set the detailed parameters of the selected device.
Checking Device Information
Steps:
1.
In the device list, you can click Remote Configuration to enter the remote configuration
interface.
2.
Click System -> Device Information to check the device basic information and the device
version information.
Editing Device Name
In the Remote Configuration interface, click System -> General to configure the device name and
overwrite record files parameter. Click Save to save the settings.