You can select indoor or others application modes according to actual environment.
Lock Authentication Failed Face
After enabling the Live Face Detection function, the system will lock the user's face for 5
minutes if the live face detection is failed for more than the configured attempts. The
same user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes,
the user can authenticate via the real face twice continuously to unlock.
Liveness Level
After enabling Face Anti-Spoofing function, you can set the matching security level when
performing live face authentication.
4. Click OK.
5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to
the selected card reader(s).
Configure Parameters for Alarm Output
After adding the access control device, if the device links to alarm outputs, you can configure the
parameters.
Before You Start
Add access control device to the client, and make sure the device supports alarm output.
Steps
1. Click Access Control → Advanced Function → Device Parameter to enter access control
parameter configuration page.
2. In the device list on the left, click to expand the door, select an alarm input and you can edit
the alarm input's parameters on the right.
3. Set the alarm output parameters.
Name
Edit the card reader name as desired.
Alarm Output Active Time
How long the alarm output will last after triggered.
4. Click OK.
5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output.
9.7.2 Configure Remaining Open/Closed
You can set the status of the door as open or closed. For example, you can set the door remaining
closed in the holiday, and set the door remaining open in the specified period of the work day.
Before You Start
Add the access control devices to the system.
DS-K1TA70 Series Face Recognition Terminal User Manual
140
