If you enable this function, you can save the picture captured by linked camera to the device.
Clear All Pictures in Device
Note
All pictures cannot be restored once they are deleted.
Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Go to Configuration → Access Control → Card Authentication Settings .
Select a card authentication mode and click Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
The device will read card via Wiegand 26 protocol (read 3 bytes).
Wiegand 34 (4 bytes)
The device will read card via Wiegand 34 protocol (read 4 bytes).
8.5.20 Set Biometric Parameters
Set Basic Parameters
Click Configuration → Smart → Smart .
Note
The functions vary according to different models. Refers to the actual device for details.
DS-K1TA70 Series Face Recognition Terminal User Manual
97
