HIKVISION DS-K1T605 Series, User Manual

Page: 53 / 107

9.1.18 Get Person Information from Access
Control Device
If the added access control device has been configured with
person information (including person details, fingerprint, and
issued card information), you can get the person information
from the device and import them to the client for further
operations.
Steps
Note
• If the person name stored in the device is empty, the person
name will be filled with the issued card No. after importing to
the client.
• The gender of the persons will be Male by default.
• If the card number or person ID (employee ID) stored on the
device already exists in the client database, the person with
this card number or person ID will not be imported to the
client.
1. Enter Person module.
2. Select an organization to import the persons.
3. Click Get from Device.
4. Select the access control device from the drop-down list.
5. Click Get to start importing the person information to the
client.
The person information, including person details, person's
fingerprint information (if configured), and the linked cards (if
configured), will be imported to the selected organization.
9.1.19 Move Persons to Another Organization
You can move the added persons to another organization if you
need.
Before You Start
• Make sure you have added at least two organizations.
• Make sure you have imported person information.
Steps
1. Enter Person module.
2. Select an organization in the left panel.
The persons under the organization will be displayed in the
right panel.
3. Select the person to move.
4. Click Change Organization.
5. Select the organization to move persons to.
6. Click OK.
9.1.20 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to multiple
persons in a batch.
Steps
1. Enter Person module.
2. Click Batch Issue Cards.
44