No.
Name
Description
14
Power Interface
Connect to
power supply.
15
Battery
Connector
Connect to
battery.
5 Installation
5.1 Installation Environment
• Install the device at least 2 meters away from the light, and at
least 3 meters away from the window or the door.
• Make sure the environment illumination is more than 100 Lux.
Note
For details about installation environment, see Tips for
Installation Environment.
5.2 Install with Gang Box (Wall Mounting)
You can install the terminal with gang box on the wall or other
surfaces.
Steps
1. According to the baseline on the mounting template, stick the
mounting template on the wall or other surface, 1.1 meters
higher than the ground.
Figure 5-1 Mounting Template
2. Drill holes on the wall or other surface according to the
mounting template and install the gang box (80 mm × 80 mm).
3. Use two supplied screws to secure the mounting plate on the
gang box.
4. Remove the two screws at the bottom of the device.
5. Align the terminal with the mounting plate and buckle them
together.
6. Use a hex wrench to fasten the two screws at the bottom.
8
Summary of Contents for DS-K1T605 Series
Page 1: ...Face Recognition Terminal UD07930B E...
Page 104: ...95...
Page 105: ...C Relationship between Device Height Person Height and Standing Distance 96...
Page 107: ...E Dimension 98...
