HIKVISION DS-K1T605 Series User Manual Download

Page: 13 / 107

control systems, such as logistic centers, airports, university

campuses, alarm centrals, dwellings and so on.

3.2 Features

• High performance processor with deep learning algorithm
• Authenticates by swiping Mifare card or EM card according to

different models

• Live face detection: Only live face can be detected and

authenticated

• Face capacity: 3200
• Max. 5000 fingerprints storage

Note

Some device models do not support fingerprint related

functions.

• Multiple authentication modes

Note

Some device models do support authenticating by fingerprint.

• 1:1 and 1:N matching by comparing face pictures and

fingerprints

Note

Some device models do support authenticating by fingerprint.

• 5-inch LCD touch screen to display operation interface, etc.
• Voice prompt
• Dual-lens camera: one camera for receiving visible light and the

other one for receiving infrared light

• Standard definition
• Face picture recognition and face picture capture function
• Supports TCP/IP, Wi-Fi , RS-485 communication and Wiegand

communication

• Switches between input and output when communicating by

Wiegand protocol; Supports output card No. via Wiegand

communication

• Connects to external access controller or one external card

reader via RS-485 communication

• Connects to external access controller or Wiegand card reader

via Wiegand communication

• Connects to secure door control unit to avoid the door opening

when the terminal is destroyed

• Supports importing and exporting data via USB flash drive
• Stand-alone operation
• Supports anti-passback, multiple authentications, and open

door with first card

• Remotely controls via the client software
• Power supply by lithium battery

Summary of Contents for DS-K1T605 Series












































































































Search results

Summary of Contents for DS-K1T605 Series

Reviews:

Related manuals for DS-K1T605 Series

Brands by name

Popular brands

HIKVISION DS-K1T605 Series, User Manual

Search results

Summary of Contents for DS-K1T605 Series

Reviews:

Related manuals for DS-K1T605 Series

Brands by name

Popular brands