6.7.2 Check Real-Time Access Records
The access records will display in real time, including card swiping records, fingerprint comparison
records, etc. You can view the person information and view the picture captured during access.
Steps
1. Click Monitoring and select a group from the drop-down list on the upper-right corner.
The access records triggered at the doors in the selected group will display in real time. You can
view the details of the records, including card No., person name, organization, event time, etc.
2. Optional: Check the event type and event status so that these events will show in the list if the
events are detected. The events of unchecked type or status will not be displayed in the list.
3. Optional: Check Show Latest Event and the latest access record will be selected and displayed at
the top of the record list.
4. Optional: Click the event to view the accessed person details, including person pictures
(captured picture and profile), person No., person name, organization, phone, contact address,
etc.
Note
You can double click the captured picture to enlarge it to view the details.
5. Optional: Right click on the column name of the access event table to show or hide the column
according to actual needs.
6.8 Event Center
You can configure the event of the added resources and set the linkage actions so that when the
event is triggered, the software client can notify the security personnel and record the event
details for checking afterwards.
In the event management page, you can configure access control event. For details about access
control event configuration, refer to Configure Linkage Actions for Access Control .
In the event center, you can view the real-time events and search the historical events. For details,
refer to View Real-Time Events and Search Historical Events .
6.8.1 Enable Receiving Events from Devices
Before the client can receive the event information from the device, you need to arm the device
first.
Steps
1. Click → Tool → Device Arming Control open Device Arming Control page.
All the added devices display on this page.
2. In the Operation column, turn on the switch to enable auto-arming, or click Arm All to arm all
the devices.
DS-K1A802A Series Fingerprint Time Attendance Terminal User Manual
80
