HIKVISION DS-K1107 Series, User Manual

Page: 14 / 20

DS-K1107 Series Card Reader
13
No. Description DIP Switch Status
protocol. 0: RS-485 protocol.
7
Wiegand Protocol
(available when No. 6 is 1)
1: Wiegand protocol
of 26-bit;
0: Wiegand protocol
of 34-bit.
8
Matched Resistance
(available for RS-485 protocol) 1: Enable;
0: Disable.
2.2 Definition of Cable
The description of 10 cables is shown below.
Table 2-3 Description of Cable
Color Description
Orange Red LED Control (available for Wiegand Protocol)
White Wiegand W1 (available for Wiegand Protocol)
Green Wiegand W0 (available for Wiegand Protocol)
Blue RS-485-
Yellow RS-485+
Red PWR (+12 VDC)
Black GND
Gray TAMPER (available for Wiegand Protocol)
Purple Beep Control (available for Wiegand Protocol)
Brown
Green LED Control (available for Wiegand
Protocol)
2.3 Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to