HIKVISION DS-K1107 Series, User Manual

Page: 13 / 20

DS-K1107 Series Card Reader
12
Chapter 2 Installation
2.1 Introduction for DIP Switch
The DIP switch module is shown below. The No. of DIP switch
from left to right is 1 ~ 8.
Figure 2-1 DIP Switch Module
Table 2-1 Description of DIP Switch
Icon Description
Represent 1 in binary mode
Represent 0 in binary mode
For example, binary value of the following status is: 0000 1100.
Figure 2-2 DIP Switch Module
Table 2-2 Description of DIP Switch
No. Description DIP Switch Status
1 ~ 4 Address of RS-485
1: 1
0: 0
5 Reserved Reserved
6 Wiegand protocol or RS-485 1: Wiegand protocol;