HIKVISION DS-AT1000S Series, Quick Start Manual, Page: 26 / 29

DS-AT1000S Series Storage System Quick Start Guide
25
Chapter 6 Basic Configuration
Log in to Hybrid SAN sub-system and follow the steps to configure basic parameters.
6.1 Camera Management
Step 1 Log in to Hybrid SAN sub-system. For details, refer to 5.2.1 Activate Hybrid SAN Sub-System.
Step 2 Go to Configuration > System > Camera Management.
Figure 6-1 Camera Management
Step 3 Add network cameras. Choose from:

Manual Add: Enter the network camera information to add it.
1) Click Add.
Figure 6-2 Add Network Camera