Network Video Recorder Quick Start Guide
23
Menu > Configuration > Network
Figure 3. 10
Network Settings
2.
Select the
General
tab.
3.
In the
General Settings
interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4
Gateway, MTU and DNS Server.
If the DHCP server is available, you can check the checkbox of
DHCP
to automatically obtain an IP address
and other network settings from that server.
4.
After having configured the general settings, click the
Apply
button to save the settings.
3.8
Adding IP Cameras
Purpose:
Before you can get live video or record the video files, you should add the network cameras to the connection list
of the device.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the
User Manual
for activating the inactive IP camera.
Steps:
1.
Click to select an idle window in the live view mode.
2.
Click the
icon in the lower-left corner of the window to pop up the Add IP Camera interface.
