HIKVISION DS-96000NI-I16/H Series User Manual Download

Page: 92 / 188

Network Video Recorder User Manual

Search History Operation

Save Search Condition

Purpose

You can save the search conditions for future reference and quick search.

Go to File Management > All Files/People Appearance File/Vehicle File.

Set the search conditions.

Click Save.

Enter a name in text field and click Finished. The saved search conditions will be displayed in
search history list.

Call Search History

Purpose:

You can quickly search files by calling search history.

Go to File Management > All Files/Human Files/Vehicle Files.

Click a search conditon to quickly search files.

Summary of Contents for DS-96000NI-I16/H Series





























































































































































































Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands

HIKVISION DS-96000NI-I16/H Series, User Manual

Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands