HIKVISION DS-96000NI-I16/H Series User Manual Download Page 57

Page: 57 / 188

Network Video Recorder User Manual

Call Preset (2)

Set a Patrol

Purpose:

Patrols can be set to move the PTZ to different key points and have it stay there for a set
duration before moving on to the next key point. The key points are corresponding to the
presets.

Click

on the quick settings toolbar of the PTZ camera live view.

The PTZ control panel displays on the right of the interface.

Click Patrol to configure patrol.

Patrol Configuration

Select the patrol No. in the text field.

Click Set to enter the Patrol Settings interface.

Patrol Settings

Summary of Contents for DS-96000NI-I16/H Series





























































































































































































Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands

HIKVISION DS-96000NI-I16/H Series, User Manual

Search results

Summary of Contents for DS-96000NI-I16/H Series

Reviews:

Related manuals for DS-96000NI-I16/H Series

Brands by name

Popular brands