HIKVISION DS-9500 Series NVR, User Manual, Page: 66 / 76

User Manual of DS-9500 Series NVR
63
9.8.2 Virtual HDD Configuration
9.8.2.1 Creating Virtual Disk
Step3: Return to the Array interface to
check the rebuilding status under Task bar.
Note:
After the array migration is complete and device
reboot, the array and each virtual disk capacity will be
refreshed. Now, it needs to reboot the device and expand
capacity for each virtual disk.
Step4:
Expand virtual disk.
1) Enter the HDD Settings menu by clicking Config >
Remote Config >Parameters Configuration.
2) Select the HDD Settings to enter the HDD Settings
interface.
3) Select the HDD (s) for capacity expansion, and click
the
Expand button to start capacity expansion.
Step1: Create array for creating virtual disk.
1) Enter the RAID Settings menu by clicking
Config > Remote Config >RAID
Configuration.
2) Select the Array tab to enter the Array
interface.
3) Select the array from the list for creating
virtual disk.
4) Click the Create VD button to enter the
Create Virtual Disk interface.
Note:
Up to 8 virtual disks can be created for the
array.