HIKVISION DS-9500 Series NVR, User Manual, Page: 63 / 76

User Manual of DS-9500 Series NVR
60
Rebuilding Physical HDD
When the system has detected HDD exception or the array is in Degraded status, you can replace the exception
HDD with new functioning physical HDD in the same SATA interface to start the auto-rebuild task.
Step 4: When the system has detected HDD
exception or the array is in Degraded status, the
auto-rebuild task will be automatically started.
Step1: Enable Auto-rebuild Function.
1) Enter the RAID Settings menu by clicking
Config > Remote Config >RAID Configuration.
2) Select the RAID Adapter tab to enter the
Adapter interface.
3) Enable the Auto-rebuild function by selecting the
option to
Yes from the dropdown menu of Auto
Rebuild.
4) Click the Save button.
Step2: Start rebuilding of physical HDD.
When the system has detected HDD exception or the
array is in
Degraded status, replace the exception HDD
with new functioning physical HDD in the same SATA
interface, and then the auto-rebuild task will be
automatically started.
Note:
It is recommended to use the same HDDs
(including model and capacity) for replacement and
then set the new physical HDD to
Normal type so as to
maintain reliable and stable running of the disks.