HIKVISION DS-9500 Series NVR, User Manual, Page: 62 / 76

User Manual of DS-9500 Series NVR
59
Step1: Enable Auto-rebuild Function.
1) Enter the RAID Settings menu by clicking
Config > Remote Config >RAID Configuration.
2) Select the RAID Adapter tab to enter the Adapter
interface.
3) Enable the Auto-rebuild function by selecting the
option to
Yes from the dropdown menu of Auto
Rebuild.
4) Click the Save button.
Step 2: Select Hot Spare Disk.
1) Select the Physical HDD tag in RAID Settings
menu to enter the Physical HDD interface.
2) Select the Physical HDD from the list and then
click the
Set Spare button to enter Set Hot
Spare interface.
Note:
It is recommended to use the same HDDs
(including model and capacity) for setting hot spare
so as to maintain reliable and stable running of the
disks.
Step 3: Set Hot Spare Type.
1) Set the hot spare type of the selected HDD to
Global Hot Spare or specified hot spare.
Global hot spare: it can be used as the hot
spare for any array created in the system.
Specified hot spare: it can be used as the
hot spare for the specified array only.
2) Click the OK button to confirm the settings.
3) Start auto-rebuild task.