HIKVISION DS-9500 Series NVR, User Manual, Page: 59 / 76

User Manual of DS-9500 Series NVR
56
9.8 RAID Configuration
Note:
This Chapter is available for DS-9500NI-R model only.
9.8.1 Array Configuration
The DS-9500NI-R is capable of realizing Redundant Array of Independent Disk, supporting RAID0, RAID1,
RAID5 and RAID10 RAID types. Prior to operation, please install the array adapter and HDD properly.
It is recommended to use the same HDDs (including model and capacity) for array creation and configuration so as
to maintain reliable and stable running of the disks.
Note:
The ST31000525SV/ST31000340NS HDD models are not supported for array configuration currently.
9.8.1.1 Creating Array
Before recording, it needs to create the array in the RAID menu.
One-touch Configuration
To configure array by One-touch Configuration:
Step1: Enter the RAID Settings menu by clicking
Config > Remote Config >RAID Configuration.
Click the
One-touch button to start array
configuration.
Note:
When the One-touch Array Configuration is
selected, the device can automatically enable the
installed HDDs for array creation. As the default array
type is RAID 5, thus at least 3 hard disks must be
installed.
Step2: Edit the Array Name and then click the OK
button to start array configuration.