HIKVISION DS-9500 Series NVR, User Manual, Page: 55 / 76

User Manual of DS-9500 Series NVR
52
9.5.4 NTP Settings
Adopting NTP function can enable client software to synchronize the time and data of the device regularly.
9.5.5 Net Disk Settings
By Net Disk Settings, recorded data can be saved to the network storage disk provided by NAS or IP SAN server.
Click

Enable DDNS.
If the “IP Server IP” is selected as protocol, then input the
address where the IP server is running.
If the “Dyndns” is selected as protocol:
Server Name: Input the IP address of the server, such as
members.dyndns.org;
Domain: the domain name that user applied for the device,
such as test.dynlia.com;
User name, password and verify: the account information that
user registered on the Dyndns website.
If the “Peanut Hull” is selected as protocol:
Input the user name and password applied on the Peanut Hull
website to visit the device by the applied domain name.
Select

Tick to enable NTP function.
Note:
Time Synchronization Interval: 0~10080 min (default
60min).
If the device connected to the public network, the IP address
of NTP server provided by carrier can be input in the blank
“Server Address”;
If the device connected to private network, the IP address of
NTP server built by NTP software can be input the blank
“Server Address”.