DS-76xx-I2/xP/4S NVR UM
47
Figure 6-2 PTZ Parameters Settings
3)
Edit the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera parameters.
4)
Click
OK
to save the settings.
Set PTZ Presets, Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.
Set a Preset
Purpose:
Follow the steps to set the preset location which you want the PTZ camera to point to when an event
takes place.
1)
Click
on the quick settings toolbar of the PTZ camera live view. The PTZ control panel
displays on the right of the interface.
2)
Use the directional buttons on the PTZ control panel to wheel the camera to the location where
you want to set preset, and the zoom and focus operations can be recorded in the preset as
well.
3)
Click
in the lower right corner of live view to set the preset.
