I Series Network Video Recorder User Manual, 030117NA
58
3.
Click the Set button to add key points for the patrol.
Figure 53 Key Point Configuration
4.
Configure key point parameters such as the key point No., key point interval duration, and patrol
speed. The key point is corresponding to the preset.
Key Point No.
determines the order the PTZ will
follow while cycling through the patrol.
Duration
refers to the time span to stay at the corresponding
key point.
Speed
defines the speed the PTZ will move from one key point to the next.
5.
Click the
Add
button to add the next key point to the patrol, or click the
OK
button to save the key
point to the patrol.
6.
You can delete all the key points by clicking the
Clear
button for the selected patrol, or click the
Clear
All
button to delete all the key points for all patrols.
5.2.5.
Calling Patrols
Calling a patrol makes the PTZ move according the predefined patrol path.
1.
Click the
PTZ
button in the lower-right corner of the PTZ setting interface, or press the PTZ button on
the front panel, or click the PTZ Control icon
in the quick setting bar, or select the PTZ
option in the right-click menu to show the PTZ control panel.
2.
Click the
button to show the general settings of the PTZ control.
Figure 54 PTZ Panel, General