I Series Network Video Recorder User Manual, 030117NA
45
3.5.5.
Editing IP Cameras Connected to PoE Interfaces
PoE interfaces enables the NVR system to pass electrical power safely, along with data, on Ethernet
cabling to the connected network cameras.
NOTE:
The DS-7700NI-I4/16P NVR PoE interface supports the Plug-and-Play function.
3.5.6.
To Add Cameras for NVR Supporting PoE Function
3.5.6.1
Before You Start
Connect the network cameras via the PoE interfaces.
1.
Enter the camera management interface, Menu > Camera Setup.
Figure 36 List of Connected Cameras
NOTE:
The cameras connecting to the PoE interface cannot be deleted in this menu.
2.
Click the
button, and select the Adding Method in the drop-down list.
•
Plug-and-Play:
It means that the camera is connected to the PoE interface, so in this
case, the parameters of the camera can’t be edited. The IP address of the camera can
only be edited in the Network Configuration interface, see
Chapter 11.1
•
Configuring General
Settings
for detailed information.