I Series Network Video Recorder User Manual, 030117NA
177
Figure 237 Configure Record/Picture Quota
5.
Copy the quota settings of the current camera to other cameras if required. Click the Copy button to enter the
Copy Camera menu, as shown in Figure 238.
Figure 238 Copy Settings to Other Camera(s)
6.
Select the camera(s) to be configured with the same quota settings. You can also click the IP Camera
checkbox to select all cameras.
7.
Click the OK button to finish the Copy settings and go back to the Storage Mode interface.
8.
Click the Apply button to apply the settings.
NOTE:
If the quota capacity is set to
0
, then all cameras will use the total HDD capacity for record and
picture capture.
14.6
Configuring Disk Clone
If the S.M.A.R.T. detection result declares the HDD is abnormal, you can choose to clone all the data on the HDD to
an inserted eSATA disk manually. Refer to
Chapter 12.8 HDD Detection
for details of S.M.A.R.T. detection.
NOTE:
Before starting, connect an eSATA disk to the device.